Switching Off The Engine; While Driving; Parking Brake - BMW 2010 Z4 Owner's Manual

Table of Contents

Advertisement

Switching off the engine

Always take the remote control with you
when you leave the vehicle.
Set the parking brake firmly when parking; oth-
erwise, the vehicle could
Manual transmission
1.
With the car at a standstill, press the start/
stop button.
2.
Shift into first gear or reverse.
3.
Set the parking brake.
4.
Removing the remote control from the igni-
tion lock, refer to page 50.
Automatic transmission
1.
With the car at a standstill, move the selec-
tor lever to position P.
2.
Press the start/stop button.
3.
Set the parking brake.
4.
Removing the remote control from the igni-
tion lock, refer to page 50.
7-gear sport automatic transmission
with dual clutch
1.
With the car at a standstill, engage trans-
mission position P.
2.
Press the start/stop button.
3.
Set the parking brake.
4.
Removing the remote control from the igni-
tion lock, refer to page 50.

Parking brake

The concept
Your BMW is equipped with an electromechan-
ical parking brake that can be set and released
by using a button.
The parking brake is primarily used to prevent
the vehicle from rolling when it is parked.
52
Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG
roll.<
When the vehicle is stationary, the parking
brake acts on the rear wheels via an electrome-
chanical mechanism. When the vehicle is rolling
or being driven, the parking brake acts on the
disc brakes of the front and rear wheels via the
hydraulic brake system.
Setting the brake
Pull the button. The parking brake is set.
The indicator lamp in the instrument
cluster and the LED on the button light
up red. The parking brake is set.
Indicator lamp in Canadian models.
To set the parking brake, the remote control
does not need to be in the ignition lock.

While driving

In the rare case that the parking brake needs to
be used while driving, pull the button for a
lengthy period:
The vehicle brakes hard while the button is
being pulled.
The indicator lamp in the instrument
cluster lights up red, a sound is issued
and the brake lamps light up.
Indicator lamp in Canadian models.
As soon as you brake the vehicle almost to a
standstill, approx. 2 mph/3 km/h, the parking
brake remains set.

Advertisement

Table of Contents
loading

Table of Contents