Swimming Pool Functions - Fujitsu WATERSTAGE WOYG160LJL Maintenance Document

Holiday
DHW mode
status
Off x
On Yes
On No
On No
On No
On No
On No
On No
On No
x = indiff erent
Information
Release by low tariff input always triggers forced DHW
charging
If the low tariff input EX2 has not been confi gured and
release via OPK has nevertheless been set, the DHW
level will either continuously remain on reduced or will
follow time program 4.
Legionella Function
Line Nr Programming line
1640 Legionella function
1641 Legionella function periodically
1642 Legionella function weekday
Legionella function
• Periodically
The legionella function occurs repeatedly according to
the adjusted periodicity (command line 1641).
• Fixed weekday
The legionella function can be activated on a fi xed day
of the week (command line 1642). With this setting,
heating up to the legionella setpoint occurs on the
scheduled day of the week, regardless of the storage
tank temperatures during the previous period.

▼ Swimming Pool Functions

Line Nr Programming line
2056 Setpoint source heating
The controller enables a swimming pool to be heated
by the heat pump. An individual setpoint can be set by
means of parameter 2056, which appears when the
swimming pool function is activated by parameter 6046
being set to "Swimming pool release".
Use of input H33 requires an extension to be connected
to the control.
Waterstage / Maintenance Manual / 2105 - EN
Release Time pgm status
(settings 1620)
x
x
...
Low tariff (OPK)
Low tariff (OPK)
Time pgm 4 or OPK
Time pgm 4 or OPK
Time pgm 4 or OPK
Time pgm 4 or OPK
Low tariff status
(Pgm 4) (Ex2)
x
x
...
x Inactive
x Active
Nominal Inactive
Reduced Inactive
Nominal Active
Reduced Active
DHW mode level
x Frost protection
x Frost protection
x ...
Reduced
Nominal
Nominal
Reduced
Nominal
Nominal
- 79 -