Time Program Functions (Heating Circuit 1 & 2, Dhw, Cooling) - Fujitsu WATERSTAGE WOYG160LJL Maintenance Document

Heating Circuit Assignment
Line Nr Programming line
70 Software version
Software version
The indication shows the current version of the user
interface.
▼ Time Program Functions (heating circuit 1 & 2, DHW, cooling)
Several control programs are available for the heating circuits and the production of DHW. They are initiated in
"Automatic" mode and control the change in temperature levels (and therefore the associated setpoints, reduced
and comfort) via the adjusted changeover times.
Enter changeover times
Changeover times can be adjusted in a combined way, i.e., identical times for several days or distinct times for
certain days. Preselecting groups of days (e.g., Mon...Fri and Sat...Sun) having the same changeover times makes
adjustment of the changeover program considerably shorter.
Changeover Points
Line Nr
HC1 HC2
500 520
501 521
502 522
503 523
504 524
505 525
506 526
Standard Program
Line Nr
516, 536, 576, 616
All time programs can be reset to factory settings.
Each time program has its own command line for this
reset action.
In this case, individual settings will be lost !
- 66 -
4/DHW 5
560 600
561 601
562 602
563 603
564 604
565 605
566 606
Programming line
Default values (No /Yes)
Programming line
Preselection (Mon-Sun / Mon-Fri / Sat – Sun / Mon...Sun)
1st phase On
1st phase Off
2nd phase On
2nd phase Off
3rd phase On
3rd phase Off
Holidays
Line Nr
HC1 HC2
642 652
643 653
648 658
The holiday program enables changing the heating
circuits over to a selected operating level according to
the date (calendar).
Important !
The holiday program can be used only in the automatic
mode.
Waterstage / Maintenance Manual / 2105 - EN
Programming line
Period start (Day / Month)
Period end (Day / Month)
Operating level