BMW 2009 M5 Owner's Manual page 93

7. Select desired information of Head-Up Dis-
play.
8. Press the controller.
The information appears in the Head-
Up Display.
"M View": the M view appears in the
Head-Up Display. Information unavailable in
the M view appears on the Control Display
in gray and cannot be selected.
"M View": the default view is displayed.
The M view for the Head-Up Display can also be
selected with the button on the steering
wheel, refer to MDrive on page 52.
The settings are stored for the remote control
currently in use.
Default view
1 Navigation instructions
2 Stored desired speed of cruise control
3 Speed
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG
M view
1 Current engine speed, highlighted
2 Advance warning field of tachometer
3 Red warning field of tachometer, also refer
to Tachometer on page
4 Speed
5
Gear display
For information on the shift lights in the
tachometer, refer to page 63.
Setting brightness
The brightness of the display is adapted to the
ambient lighting conditions. However, you can
change the basic setting.
With the low beams switched on, the brightness
can also be adjusted with the knurled wheel of
the instrument lighting.
iDrive, for operating principle refer to page 16.
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
4. Select "Display settings" and press the
controller.
5. Change to upper field if necessary. Turn the
controller until "Head-Up Display" is
selected and press the controller.
67
91