Engine Oil; Possible Displays - BMW 2009 M5 Owner's Manual

Table of Contents

Advertisement

Engine oil

The engine oil consumption is dependent on
driving style and driving conditions.
Checking engine oil level
Your vehicle is equipped with an electronic oil
level check.
The oil level can be displayed when the engine
is at operating temperature. Constant short-
distance driving or a very sporty driving style
can make it impossible for a measurement to be
taken.
Displays in instrument cluster
You can display the current oil level in the
instrument cluster.
1
Oil level
2
Maximum marking
3
Minimum marking
4
BC button
Press the button 4 in the turn signal lever
repeatedly until the display for the oil level
appears in the instrument cluster.
Manual transmission: the engine oil level
will be shown in the lower
The oil level must be between the two marks.
A new measurement is automatically taken
after each engine start.
212
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG

Possible displays

1
Oil level OK
2
Oil level is being determined.
This process takes about 1 minute when
stopped on a level surface.
If the engine oil has been topped off, the
measurement of the oil level can take up to
30 minutes.
3
Oil level at minimum:
Add a maximum of 1 US quart/1 liter of
engine oil at the next opportunity, refer to
Adding engine oil below. Add at least
0.5 US quart/0,5 liters of oil; otherwise, the
oil level check cannot reliably display the
new oil level.
If the oil level displayed is below minimum,
add engine oil immediately. Failure to do so
display.<
may lead to engine damage.
4
Oil level too high
result if too much oil has been
5
No value can be determined at this time.
Engine is not yet at operating temperature.
Have the vehicle checked immedi-
ately, otherwise engine damage may
added.<

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 m5

Table of Contents