Trip Computer - BMW 2009 6 Series Owner's Manual

For different routes
You can display the average speed and average
consumption for two different routes on the
Control Display, refer to the following and to

Trip computer.

Displays on Control Display
You can also call up the computer via iDrive, for
operating principle refer to page 16.
1. Press the button.
This opens the start menu.
2. Move the controller to the right to open
"Navigation".
Without navigation system
Data".
3. Select "Car Data" and press the controller.
4. Select "Onboard info" and press the con-
troller.
> Estimated time of arrival at destination and
remaining distance:
>
Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
*
system , refer to page 136.
> Cruising range
> Average speed
78
Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG
>
Resetting values
You can reset the values for the average speed
and average fuel consumption:
1.
2.
Entering a distance manually
1.
*
: Open "Car
2.
3.
The distance is automatically preset during the
destination guidance of the navigation sys-
tem
Trip computer
The trip computer is suitable, for example, for a
vacation trip.
1.
2.
3.
Average fuel consumption
Select the respective menu item and press
the controller.
To confirm your selection, press the con-
troller again.
Select "Distance to dest." and press the
controller.
Turn the controller to select the distance
to your destination.
Press the controller to apply the setting.
*
.
Open the start menu.
Open "Navigation".
Without navigation system
Data".
Select "Car Data" and press the controller.
*
: Open "Car