BMW 2009 6 Series Owner's Manual page 61

Follow the system manufacturer's
instructions on installation and use of
LATCH child restraint systems in order not to
impair their protective function.<
Anchor points for LATCH mounts
Before attaching the LATCH child's seat, pull
the belt away from the region of the child
restraint fixing system.
Make sure that both of the lower LATCH
mounts have properly clicked into place
and that the child restraint system is resting
snugly against the backrest. Otherwise, the
protective action may be
Rear seats
The mounting points for the LATCH anchors
are located at the positions indicated by arrows
in the gap between the seat and the backrest.
Coupe: child restraint system with
tether strap
Only use the top tether-strap mounting
points to secure child restraint systems,
otherwise the mounting points could be dam-
aged.<
Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG
impeded.<
There are two additional mounting points for
child restraint systems with a tether strap, refer
to arrows.
Placement of tether strap
Make sure that the tether strap is not
routed over sharp edges and does not
twist on its way to the upper mounting point;
otherwise, the belt may not properly secure the
child restraint system in the event of an acci-
dent.<
1
Direction of travel
2 Head restraints
3
Tether strap hook
4 Mounting point
5
Rear window shelf
6 Backrest
7 Tether strap of child restraint system
Before using the mounting points, fold the head
*
restraint into its raised position.
1. Slide the head restraint into the bottom
position.
2. Guide the tether strap over the head
restraint.
3. Attach the tether strap hook to the mount-
ing point.
59