Service Requirements; Units Of Measure - BMW 2009 328 Owner's Manual

1 Button for:
> Selecting display
> Setting values
2 Button for:
>
Confirming selected display or set val-
ues
> Calling up computer information
Exiting displays
The outside-temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.

Units of measure

Setting the units of measure
You can change the units for fuel consumption,
route/distance, temperature and pressure.
iDrive, for operating principle refer to page 16.
1. "Settings"
2. "Language/Units"
3. Select the desired menu item.
4. Select the desired unit.
The settings are stored for the remote control
currently in use.
Online Edition for Part no. 01 41 2 602 099 - © 10/08 BMW AG
3 When the lights are on: instrument lighting
brightness
4
Calling up Check Control
5 Checking engine oil level
6 Setting the time
7 Setting the date
69 8 Viewing service requirement display

Service requirements

The remaining driving distance and the date of
the next scheduled service are displayed briefly
immediately after you start the engine or switch
on the ignition.
The extent of service work required can
be read out from the remote control by
your BMW Service
For certain maintenance operations, you can
view the respective distance remaining or due
date individually in the instrument cluster.
1. Switch on the ignition, refer to page 53.
2. Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the words "SERVICE-INFO".
3. Press button 2.
92
75
212
73
74
Advisor.<
71
71