Flashing
Green
Solid
Flashing
Blue
Solid
Flashing
Red
Flashing
and
purple
Rear panel
Figure 3-2 shows the interfaces and buttons on the back panel of the ZXHN
H196Q.
The uplink connection is failured, or failure
to configure synchronization in the Extender
mode.
The uplink connection is normal.
The WPS negotiation connection is being
implemented.
In the Extender mode, the wireless uplink
signal is strong, or the connection is successful
and the configuration synchronization is
successful in the Extender mode.
In the Extender mode, the wireless uplink
signal is weak.
Flashing red, green, and blue at the same time.
The device is upgrading software.