BMW 2006 M5 Owner's Manual page 53

Locking safety belt
1. Secure the child restraint system with the
belt.
2. Pull out the belt webbing completely.
3. Allow the belt webbing to be pulled in and
pull taut against the child restraint system.
The safety belt is locked.
Unlocking safety belt
1. Open the belt buckle.
2. Remove the child restraint system.
3. Allow the belt webbing to be pulled in com-
pletely.
Child restraint system with tether strap
There are three additional mounting points for
child restraint systems with a tether strap, refer
to arrows. Fold the corresponding mounting
point upward before using.
Placement of tether strap
Outer seats:
1. Pull the head restraint upward.
2. Guide the tether strap through the bracket
of the head restraint.
3. Slide the head restraint into the bottom
position.
Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG
4. Hook in the tether strap on the mounting
point.
Center seat:
1. Fold the center armrest somewhat toward
the front.
2. Guide the tether strap through the opening.
3. Fold back the center armrest.
4. Hook in the tether strap on the mounting
point.
LATCH child-restraint fixing system
LATCH: Lower Anchor and Tethers for CHil-
dren.
To attach a LATCH child's seat, follow the
operating and safety instructions of the
child's seat manufacturer.<
Rear seats
The mountings for the LATCH child's seat fix-
ing system are located at the points marked
with the arrows. They are not visible from the
outside.
Before attaching the LATCH child's seat, pull
the belt away from the region of the child-
restraint fixing system.
51