BMW 2006 M5 Owner's Manual page 50

> To repeat the last voice instruction:
Press the button.
MDrive
With MDrive you can configure several individ-
ual settings for your vehicle on the Control Dis-
play and activate them simultaneously with the
button on the steering wheel.
Configuring settings
With the ignition switched on you can change
the settings of MDrive on the Control Display.
iDrive, for explanation of principle, refer to
page 16.
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "Vehicle settings" and press the
controller.
4. Move the controller forward if necessary so
that the marking is located in the upper
field. Turn the controller until "MDrive" is
selected and press the controller.
48
Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG
The functions contained in MDrive are dis-
played:
> "SMG Drivelogic"
Sequential Manual Transmission with
Drivelogic: shifting modes and Drive-
logic driving programs, refer to page
> "EDC"
Programs of the Electronic Damping
Control, refer to page
> "DSC"
Dynamic Stability Control and
M Dynamic Mode, refer to page
> "POWER"
Programs of the M Engine Dynamic
Control, refer to page
> "Active seat backrest"
Programs of the active backrest width
adjustment, refer to page
> "Head-Up Display"
Views of the Head-Up Display, refer to
page 80
You can reset all settings for MDrive to their
default values:
> "Reset to default"
5. Select the desired function.
6. Press the controller.
57
76
75
58
*
41
*