BMW 2006 M5 Owner's Manual page 144

Enabling or disabling channels
iDrive, for explanation of principle, refer to
page 16.
1. Press the button.
This opens the start menu.
2. Move the controller backwards to open
"Entertainment".
3. Select "SAT".
4. Press the controller.
The channels are displayed.
These channels are enabled.
Enabling
1. Select a channel that has not yet been
enabled and press the controller.
A telephone number and the electronic
serial number, ESN, are displayed.
The electronic serial number is
required for enabling or
2. To enable the channels:
Dial the phone number.
142
Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG
Disabling
1. Select an enabled channel and press the
controller.
2. Select "ESN" and press the controller.
The electronic serial number, ESN, is dis-
played.
3. To disable the channels:
Dial the phone number.
Selecting and storing channel
1. Select "SAT" and press the controller.
Channels are shown on the Control Display
sorted on the basis of selection criteria.
disabling.<
The electronic serial number is
required for disabling.<