Advertisement
Available languages
Available languages
!
NOTE: Either the
or
dependent on the setting being used.
E. Synchronized Icon
The Wall Mounted Remote Control will control one or multiple
Connex
enabled heaters within a 50' (15 m) radius. In order for
TM
the wall setter to have this function the heater and the Wall Setter
need to be Synchronized.
1.
On the heater press and hold the V button for 3 seconds, both
the
and
icons will begin to flash.
2.
Press the - , + and then V, on the heater.
3.
Within 10 seconds press any button once on the Wall Setter.
!
NOTE: There is a 3 second delay between pressing the last
button on the wall setter and the heaters receipt of signal.
!
NOTE: To desynchronize a heater from the synchronized Wall
Setter, on the heater:
1.
Press and hold the V for 3 seconds.
2.
Press the V, + and then -.
Nothing will need to be done to the Wall Setter.
F. Lock Icon
The Wall Mounted Remote Control has a Button Lock feature, to
prevent settings from accidentally being changed.
1.
Press and hold the V for 3 seconds. Both the
Icons will begin to flash.
To Enable: Within 5 seconds press +, then -, then +, then -.
2.
The
icon will now be visible.
To Disable: Within 5 seconds press -, then +, then -, then +.
The
icon will no longer be visible.
!
NOTE: The remote control can be locked in either the Comfort
or Economy Setting. Ensure that the desired icons are present
when locking is complete.
G. Low Battery Icon
The Wall Mounted Remote Control is powered by a CR2032 (3V)
battery. When the battery is nearing the end of its life the Low
Battery Icon will appear on the LCD display.
To change the battery:
1.
Remove the Wall Mounted Remote Control from the
electrical box.
2.
Remove the back plastic cover from the remote control.
3.
Replace the battery.
!
NOTE: Ensure that battery is installed under
bottom battery prongs.
4.
Reassemble and remount remote control.
!
NOTE: Wall Mounted Remote Control will retain
all settings while battery is removed and will revert
to those settings when power is restored.
Battery Prongs
Recycling Notice
At the end of the electrical products useful life it should
not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or
retailer for recycling advice in your country.
Warranty
LIMITED WARRANTY: All Dimplex Thermostats and controllers
are warranted against defects in workmanship and materials
for one year from date of sale. This warranty does not apply
to damage from accident, misuse, or alteration, nor where the
connected voltage is more that 5 % above the nameplate voltage,
nor to equipment improperly installed or wired or maintained in
violation of the instruction sheet. This limited warranty applies only
to purchases made in any province of Canada except for Yukon
Territory, Nunavut, or Northwest Territories or in any of the 50
States of the USA (and the District of Columbia) except for Hawaii
and Alaska. This limited warranty applies to the original purchaser
of the product only and is not transferable. No other written or oral
2
icon will always be visible,
and
warranty applies. No employee, agent, dealer or other person
is authorized to give any warranties on behalf of Dimplex. The
customer shall be responsible for all costs incurred in the removal
or reinstallation and shipping of the product for repairs. Within the
limitations of this warranty, inoperative units shall be returned to
the nearest Dimplex authorized service center, and we shall repair
or replace, at our option, at no charge to you with return freight
paid by Dimplex. It is agreed that such repair or replacement is
the exclusive remedy available from Dimplex and that DIMPLEX IS
NOT RESPONSIBLE FOR DAMAGES OF ANY KIND, INCLUDING
INCIDENTAL AND CONSEQUENTIAL DAMAGE. Some States
do not allow the exclusion or limitation of consequential damages,
so the above exclusion or limitation may not apply to you. This
warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
Télécommande murale
Série DPCRWS
CARACTÉRISTIQUES
•
Style attrayant qui s'harmonise avec
tous les décors
•
Permet de commander la température
en degrés Celsius et Fahrenheit
•
Capteur électronique de température
à tranches de 0,5 °C ou °F
•
Mode économie d'énergie pour les
réglages de température temporaires
FICHE TECHNIQUE
Caractéristiques électriques
•
Commandé par pile (CR2032)
Plage de réglages de température
•
de 0 à 30 °C et de 32 à 86 °F
Montage :
•
L'appareil se monte directement dans une boîte
de sortie électrique verticale standard de 2 x 4 po.
•
Monté directement sur le mur
INSTRUCTIONS IMPORTANTES
Cet appareil a été testé et jugé conforme aux limites autorisées
pour un dispositif numérique de classe B, en vertu de la partie 15
des règlements de la FCC. Ces limites visent à offrir une protection
raisonnable contre les interférences nuisibles dans une installation
résidentielle. Ce produit génère, utilise et peut émettre de l'énergie
radioélectrique. S'il n'est pas installé et utilisé selon les instructions,
il peut causer des interférences nuisibles aux communications
radio. Toutefois, il n'y a aucune garantie que l'appareil ne causera
pas d'interférence dans le cas d'une installation particulière. Si
ce produit cause des interférences nuisibles à la réception des
signaux de radio ou de télévision, ce qui peut être vérifié en
mettant le commutateur de l'appareil en position de marche puis
d'arrêt, nous recommandons à l'utilisateur de tenter d'éliminer les
interférences à l'aide d'une ou de plusieurs des mesures suivantes:
www.dimplex.com
Advertisement
