Microsoft Surface Go 2 Replacement Manual page 13

5. Angle hinges Down - Using your thumb or index finger, push both hinges down from 90° to
approximately 30°. This will require a great deal of force. If necessary, place the microfiber cloth
between your finger and the hinge for comfort. Be careful not to push the hinge all the way into
the bucket as it will be difficult to pull back out.
6. Remove Kickstand - Using the palm of your hand, firmly hold the device down from the center of the IBC.
Simultaneously, grip the kickstand off-center between your thumb and index finger and firmly pull. Pull with
a moderate amount of force until the foam inserts slide out of the device. If the kickstand is stuck, ensure it is
not caught on the hinges.
H
O
L
D
13
M1154224-001