Suspension Bar Attachment Tabs - JBL VTX Series Rigging Manual

9.2 SUSPENSION BAR A TT ACHMENT T ABS
The Suspension Bar can be connected to either the bottom or the top of a suspended mixed array of VTX A8s and B18s. To attach a
Suspension Bar to the VTX A8 or B18 cabinet at the bottom of an array, the array attachment tabs must be released from their storage
positions. This is done by removing the quick release pins on either side of the SB and then letting the attachment tabs spring into place.
The attachment tabs can then get pinned to the VTX A8 or B18 cabinet using the cabinet's QRPs.
EXAMPLES:
• Suspension Bar configured to attach to the top of an array.
A
• Suspension Bar configured to attach to the bottom of an array for pull-back.
B
VTX B18 | Rigging Manual
39
A
B