Rotating The Dolly Tabs For Use With The Acc Dolly - JBL VTX Series Rigging Manual

7.1 ROT A TING THE DOLL Y T ABS FOR USE WITH THE ACC DOLL Y
Two retractable dolly tabs at the front of the B18 are used to secure the ACC dolly board to the subwoofer. The tabs ship from the factory
facing the inside of the B18, which is ideal for transporting B18s on a vertical transport cart, when the tabs are not needed. However, to
attach a front face dolly board to a B18, the tabs must be rotated.
STEPS:
• Remove the four M6 HEX screws holding the grill onto the B18
1
• Carefully disconnect the Molex
2
2
TOOLS REQUIRED: A 4 mm HEX key is required to remove the four M6 screws holding the grill onto the B18. A Phillips
#2 screwdriver is required to remove the four Phillips screws holding the dolly tab.
connector that connects the two front NL4 connectors to the B18
TM
19
VTX B18 | Rigging Manual
1