Edit Waypoint Lat/Lon; Waypoint Names - Eagle Expedition Installation And Operation Instructions Manual

Eagle expedition: operation instruction

Hide thumbs Also See for Expedition:

Table of Contents

sired position. Then follow the previous instructions for saving your present

position as a waypoint using the select number method. Remember, the

method of saving your present position and the cursor's position is identi-

cal.

Edit Lat/Lon

The Eagle Expedition lets you enter any latitude/

longitude using the keyboard and save it under

any waypoint number, from 1 to 750. You can also

change any waypoint's position using this method.

To do this, first select the waypoint number that

you want to save a position under from the way-

point menu. In this example, we'll use waypoint

number 10. Next, highlight the "Options" menu and

press the right arrow key. Now highlight the "Edit

Lat/Lon" menu and press the right arrow key. The

screen shown at right appears. Using the left and

right arrow keys, highlight each number in the po-

sition and change it using the up and down arrow

keys. When you're ready to save this position and return to the waypoint

screen, press the ENT key. The location you entered shows at the bottom

of the screen under the waypoint number you selected. Note: You can

also use this method to change the position of an existing waypoint.

The Expedition automatically assigns the waypoint number as a name

when the waypoint position is saved. You can find a waypoint by highlight-

ing the name on the waypoint menu as shown below left. Now press the

right arrow key. The screen shown below right appears. Use the arrow

keys to scroll through the saved waypoints. Only waypoints that have a

position will show using this method.

Table of Contents