Service Guide - Zenoah G430RC Owner's Manual

SERVICE GUIDE

Clutch Bolt
(14mm Hex.)
Rotor Nut
17mm Hex.
Puller Bolts
Rotor
1) REMOVING CLUTCH SHOE
1. Remove the housing and plug cap.
2. Remove the spark plug and fit the stopper(4810-
96220) into the plug hole.
3. Remove clutch bolts(17mm Hex.).
2) REMOVING ROTOR (FAN)
4. Remove the rotor nut(12mm Hex.).
5. Remove the rotor using the puller assy (2890-96100).
Apply 8mm puller bolts.
Puller
15