Installing The Mainboard In A Case - ECS P6VPA2 Manual

Installing the Mainboard in a Case

Most system cases have mounting brackets installed in the case,
which correspond to the holes in the mainboard. Place the
mainboard over the mounting brackets and secure the
mainboard into the mounting brackets with screws.
Most cases have a choice of I/O templates in the rear panel.
Make sure that the I/O template in the case matches the I/O
ports installed on the rear edge of the mainboard.
This illustration
shows a mainboard
installed in a
standard desktop
case.
Note: Do not
overtighten the
screws as this can
stress the
mainboard.
This illustration
shows a mainboard
installed in a tower-
type case.
Power
Supply Unit
I/O
Template
Expansion
Slots
Power Supply Unit
I/O
Template
Expansion
Slots
17
Drive
Cage
Drive
Cage