AIPTEK MyNote Premium II User Manual page 21

Problem
After connecting the
digital pad to a computer,
the effective working area
is limited to only a portion
of the computer screen.
The LCD screen keeps
displaying when I press
the power button to
power off
The digital note file set
up time shown on PC
doesn't coincide with its
real set-up time.
Solution
It may be caused by false detection
of tablet driver. Try reconnecting the
USB cable. The working area should
automatically switch to the "full screen"
setting every time you connect the digital
pad to a computer.
Press the Reset button on the back of the
ink pad, the system will shut down and the
LCD screen will go out. Press the power
button again and your system can restart
working.
(Note: Your data stored will not be
destroyed after reset)
Plug the Digital Ink Pad into your PC,
and the device time will reset to the PC
synchronously.
After you replace the new batteries in the
Digital Ink Pad, please plug your pad into
the PC before you start taking notes.
1