Connecting The Digital Pad To Your Pc - AIPTEK MyNote Premium II User Manual

Connecting the digital pad to your PC

1
Power on your computer.
Press the power button of your computer to power on the
computer.
2
Connect the digital pad to the
computer.
Connect the mini connector of the
USB cable into the digital pad, and
then connect the other end into the
computer.
3
The digital pad is detected by the computer.
You can tell the computer has correctly detected the digital pad
by the following signals:
1) The LCD panel of the digital pad is displaying icons
as indicated on the right.
2) The icon appears on the system tray of your PC
desktop.
3) The LED light of the digital pad starts blinking.
Do not connect two or more digital pads to your computer at the
same time, as the computer may not be able to distinguish them.
If the icons on the LCD do not display, please check if the USB
cable is well connected at both ends. Unplug and re-plug the USB
connector if you need to.
In tablet mode, the power of the digital pad is provided by the
computer and you can not use the digital pad to record your
handwriting.
When using the digital pad as a tablet, you are recommended
to operate with a regular tablet pen. Or, you can replace the ink
cartridge of the digital pen with a dummy cartridge. Refer to page
11 for more information.
13