Advertisement
reface CP
Operation
Confirm version
C#2
While holding down the C#2 key, press the [ ] (Standby/On) switch.
Confirmation
If the [TYPE] knob's Wr lamp and Clv lamp light up or flash, your reface already has firmware version 1.30 and does not
need to be updated. If the lamps neither light up nor flash, proceed with updating as described in
reface YC
Operation
Confirm version
C#2
While holding down the C#2 key, press the [ ] (Standby/On) switch.
Confirmation
If the [WAVE] knob's H lamp lights up or flashes, your reface already has firmware version 1.30 and does not need to be
updated. If the lamp neither lights up nor flashes, proceed with updating as described in
reface CS / reface DX / reface CP / reface YC V1.30 Updater Guide
"Updating Procedure."
"Updating Procedure."
3
Advertisement
