Table of Contents
Advertisement
Multifunctional Settings (continued)
Multifunctional Settings (continued)
OPTION Menu (continued)
Item
SERVICE
RESET
34
Pressing the
(or the ENTER) button calls the SERVICE menu.
SERVICE Menu
Select an item using the
ENTER) button to per form each function. :
FANSPEED
AUTO ADJUST
Select the fan speed level using the
The HIGH ups rotation speeds of fans, though. Please use this
FANSPEED
function in using a projector at highlands etc.
memo
Select the ENABLE or the DISABLE using the
ENABLE
When the ENABLE is selected, detecting a signal change to a RGB
signal performs the automatic adjustment of the vertical position (V
AUTO
POSITION), the horizontal position (H POSITION), the clock phase
ADJUST
(H PHASE) and the horizontal size (H SIZE).
Depending on conditions, such as input image, signal cable to the unit,
environment around the unit, etc., the automatic adjustment may not
work correctly. In such a case, please choose DISABLE to disable the
automatic adjustment, and adjust manually.
Select the lens type currently used using the
AUTO
Please select depending on the following.
AUTO: automatically selects optimum mode.
1: for a standard lens (Type NL-500 etc.)
LENS TYPE
2: for a fixed short throw lens (Type FL-501 etc.)
3: for a short throw lens (Type SL-502 etc.)
4: for a long throw lens (Type LL-503 etc.)
5: for a super long throw lens (Type LL-504 etc.)
memo
memo
Select the TURN ON or the TURN OFF using the
LENS LOCK
TURN ON
Selecting the TURN ON locks the adjustment of the lens shift, the zoom and the focus.
1. Choose a color element of ghost using the bottons
GHOST
2. Adjust the chosen element using buttons
Use the
100h
After selecting "50h", "100h", "200h" or "300h", the message "REMINDER ..." will
appear after the timer reaches the interval time set by this operation. Please
refer to the "FILTER TIME" item
FILTER
When "TURN OFF" is chosen, the air filter cleaning message will not appear. Selecting "TURN
MESSAGE
OFF" displays the message to call an attention to disabling the air filter cleaning message.
• Please check and clean the air filter periodically, even if there is no message. If
the air filter becomes blocked by dust or others, the internal temperature will rise,
which could cause malfunction, or reduce the lifetime of the projector.
• It is recommended to choose "100h" in general. Please be careful with the operating environment
of the projector and the condition of air filter, especially when "200h", "300h" or "TURN OFF" is chosen.
Select the EXECUTE using the
EXECUTE
CANCEL
The items of the OPTION menu are collectively returned to the initial setting. Note that
the items "VOLUME", "LAMP TIME", "FILTER TIME" and "SERVICE" are not reset.
Description
/
buttons, and press the
LENS TYPE
LENS LOCK
GHOST
Note that the projector is noisier when the HIGH is selected.
DISABLE
1
2
3
4
This setting has an influence on the keystone distortion etc.
About the optional lens, ask your dealer.
TURN OFF
/
button to set the timer for the interval to show the message for cleaning up the air filter.
200h
300h
TURN OFF
33
button to reset the OPTION menu items. :
SERVICE
FANSPEED
AUTO ADJUST
(or the
LENS TYPE
LENS LOCK
GHOST
FILTER MESSAGE
FILTER MESSAGE
: SELECT
/
buttons. : HIGH
/
buttons. :
/
buttons. :
5
/
/
/
to disappear ghost.
50h
and the table "Related message"
NORMAL
ENABLE
AUTO
TURN OFF
100
NORMAL
buttons. :
.
.
42
Advertisement
Table of Contents
