Advertisement
INSTALLATION & ASSEMBLY INSTRUCTIONS
Some assembly is required for your new air conditioner. Please read and follow these instructions carefully.
1.This air conditioner is designed to be installed in a
standard double-hung window with a window width
between 23" and 36" (584 mm 一 914 mm).
2. The air conditioner can be installed without the
accordion panels to fit in a narrow window opening.
See the window dimensions.
3. The Lower Sash (the lower part of the window that
moves up and down) must allow for 14.5" of vertical
clearance when open. (See FIG. 1).
4. All supporting parts must be secured to firm wood,
masonry, or metal parts.
5. The electrical outlet must be within reach of the power cord.
Top Rail Assembly
The top rail must be assembled prior to installing the air conditioner in the window
Tools Needed: Phillips Screwdriver
Attaching the Top Rail to the Air Conditioner
1. Remove the air conditioner from the box and place on a hard, flat surface.
2. Remove top rail from the top of the packaging material as shown in FIG. A
3. Align the hole in the top rail with those in the top of the unit as shown in FIG. B
4. Secure the top rail to the unit with the 3/8" screws as shown in FIG. C
CAUTION
When handling the unit, be careful to avoid
cuts from the sharp metal edges and
aluminum fins on the front and rear coils.
NOTE: Save the product packaging and installation instructions for
future reference. Store the air conditioner in the
product box when not in use for an extended period of time
NOTE: For safety reasons, all 4
screws must be used to attach
the top rail.
Hide quick links:
Advertisement
