Sony LocationFree LF-X11 Operating Instructions Manual page 68

2
Select the [Make] and [Type] of the
connected device.
A list of types appears when you select a
[Make].
Select a make.
[Power]
When the device is configured correctly, you
can turn it on and off by selecting [Power].
Use the sub-screen to confirm that the power
turns on and off.
If selecting [Power] several times does not
turn on and off the connected device, make
sure the make and type you have selected are
correct.
Notes
• Even if the power turns on and off correctly
with [Power], other buttons may not be
enabled. If this happens, select [Video 1] or
[Video 2] from the Index. With the on-screen
remote control that appears when you touch the
screen, confirm that the buttons are enabled by
pressing them.
• Some devices may not have a [Power] button
(e.g. DVR). In this case, as well, use the on-
screen remote to display [Video 1] or [Video 2]
and confirm that the buttons are enabled.
z
Tips
• If the infrared receivers on two devices do not
line up and cannot be controlled with the single
supplied IR Blaster, you need to purchase a
plug adapter (not supplied) and another IR
Blaster. Connect the plug adapter to the IR
BLASTER port on the Base Station and
connect each IR Blaster to a port on the adapter
plug.
• If some of the buttons do not function, you can
use [Learning] to learn their codes. For details,
68
Select a type.
see "Learning Commands for On-Screen
Remote" (1 page 69).
3
Select [Back].
You return to the [Remote Settings] window.
4
Select [Settings], and then select [Exit].
When connecting a combo device
(e.g., a VCR+DVD player)
Select [Switch] on the on-screen remote control
to switch between the remote control for the VCR
and the remote control for the DVD player.
Connecting two devices to a single
input terminal
If you have connected a second device via a first
device, continue by selecting the [Make] and
[Type] of the second device from the list in the
lower part of the window, and then check whether
it can be turned on and off.
To switch the on-screen remote control display,
select the button.