Using Locationfree Tv On The Go; Switching The Monitor Connection Mode - Sony LocationFree LF-X11 Operating Instructions Manual

Using LocationFree TV On the Go

Switching the
Monitor Connection
Mode
This section explains how to switch the Monitor
connection type. Use the following procedure
when you take the Monitor with you away from
home and when you return home.
z
Tip
Depending on the connection mode, you must perform
the LAN connection settings beforehand on the Base
Station and Monitor. For details, see the reference
pages indicated in each section.
To Switch Between Home
Mode and On the Go Mode
Select Home mode to watch TV and browse the
Web at home. Also select Home mode when you
want to change Base Station settings.
Switch to On the Go mode when you want to use
public wireless access services away from home.
For details, see "Using Monitor On the Go"
(1 page 38). See "NetAV" (1 page 44) for
more information about NetAV settings.
z
Tips
• At the time of purchase, the connection mode is set
to Home mode.
• If the Monitor connection mode is not set correctly,
an error message will appear when you try to
connect to the network, and you will not be able to
connect. If this occurs, select [Home/On the Go] to
switch the Monitor connection mode.
1
Display the [Settings] window, and then
select [Monitor].
The [Monitor] window appears.
2
Select [Home] or [On the Go].
3
Select [Back] or [Settings], and then select
[Exit].
37