Charging - Nokia RH-41 Series Troubleshooting Instructions

RH-41
Troubleshooting Instructions
C383 "The Prommer has not received Phone
C583 acknowledge to the message."
C683 (C383-during algorithm download to target
phone)
(C583-during erasing)
(C683-during programming)
C384 "The Phone has generated NAK signal during
C584 data block transfer."
C684 (C384-during algorithm download to target
phone)
(C584-during erasing)
(C684-during programming)
C585 Data block handling timeout"
C685 (C585-during erasing)
(C685-during programming)
C586 "The status response from the Phone informs
C686 about fail."
(C586-during erasing)
(C686-during programming)

Charging

Note: The charging voltage and current can be checked by connecting the phone to the service soft-
ware and reading the ad- converter values of the vchar and ichar.
If charging fails when the LCH-9 is used, and works with ACP-7 and ACP-8, check that
the charge control pin of the system connector is connected to the ground.
Page 12
Nokia Corporation
CCS Technical Documentation
Flash
UPP
Signals between UPP-Flash
Flash
UPP
Signals between UPP-Flash
Flash
UPP
Signals between UPP-Flash
Flash
Confidential Issue 2 09/2003