Table of Contents
Advertisement
GROOMING TIPS
Here are a few tips for trimming the various parts of your facial hair
(guide only).
To Thin and Taper the Beard/Moustache
1.
Fit the adjustable comb.
2.
Use the zoom wheel to set the comb to the desired length setting.
3.
The setting will appear on the length position indicator. If you are
trimming for the first time start with the maximum trimming length
setting.
4.
Turn the unit on.
5.
Place the flat top of the trimmer comb against the skin.
6.
Slowly slide through the hair. Repeat from different directions as
necessary.
7.
If hair builds up in the trimmer comb during the trimming process,
switch the unit off, pull the comb and brush the hair off.
Note: Use the beard trimmer without the adjustable comb for trimming
hair close to the skin. This will trim hair to 1mm, holding the blades
perpendicular to the skin will trim hair to 0.4mm.
Trimming the Nape of Your Neck
Note: You will need a hand mirror for this operation if performing it alone.
1.
Remove the adjustable comb.
2.
Use your fingers to lift the hair at the base of your head up off the
neck. Your index finger should be covering the roots of the hairs you
are lifting to prevent accidental removal by the beard trimmer.
3.
Using your other hand, hold the trimmer to the base of your neck with
the cutting unit facing up and move the trimmer up the length of the
neck until it touches your finger covering the hair roots at the base of
your head.
4.
Be sure to move the unit slowly when performing this operation and to
keep the roots at the base of your head out of the way of the trimmer.
7
Advertisement
Table of Contents
