Maintenance - Fluke i6000s Flex Series Instruction Sheet

requires replacement at the earliest. No lighting of LED indicates
batteries are dead and require replacement immediately.

Maintenance

To prevent electric shock or personal injury:
•
Do not use Probes if damaged.
•
Always inspect the electronics unit, connecting
cable, and flexible measuring head for damage
before use.
•
Keep the Probes clean and free of surface
contamination.
Use mild detergent to clean the control unit and measuring head.
Make sure that the flexible measuring head, connecting cable,
and electronic enclosure are dry before further use.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and
workmanship for one year from the date of purchase. This
warranty does not cover fuses, disposable batteries, or damage
from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not
authorized to extend any other warranty on Fluke's behalf. To
obtain service during the warranty period, contact your nearest
Fluke authorized service center to obtain return authorization
information, then send the product to that Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM
ANY CAUSE OR THEORY. Since some states or countries do
not allow the exclusion or limitation of an implied warranty or of
incidental or consequential damages, this limitation of liability
may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
11/99
 Warning
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands