Symbols
The following table shows the symbols used on the product
and/or in this manual.
Symbol
Specifications
Electrical Characteristics
Current Ranges
Output Sensitivity
(AC Coupled)
Load Impedance
Accuracy (at 25 ºC)
Linearity
(10 % to 100 % of range)
Noise
Frequency Range
Phase error
Position sensitivity
(with cable >25 mm from
the coupling)
This product complies with the WEEE Directive
marking requirements. The affixed label indicates that
you must not discard this electrical/electronic product in
domestic household waste. Product Category: With
reference to the equipment types in the WEEE
Directive Annex I, this product is classed as category 9
"Monitoring and Control Instrumentation" product. Do
not dispose of this product as unsorted municipal
waste.
WARNING - RISK OF DANGER.
WARNING. HAZARDOUS VOLTAGE. Risk of electric
shock.
Consult user documentation.
Measurement Category III is applicable to test and
measuring circuits connected to the distribution part of
the building's low-voltage MAINS installation.
Double Insulated
Do not apply around or remove from uninsulated
hazardous live conductors without taking additional
protective measures.
Conforms to European Union directives.
Conforms to relevant Australian Safety and EMC
standards.
Certified by CSA Group to North American safety
standards.
Description
60 A / 600 A / 6000 A ac rms
50 mV / 5 mV / 0.5 mV per A
100 kΩ minimum
±1 % of range (45 Hz to 65 Hz)
±0.2 % of reading
8 mV ac rms (60 A)
2 mV ac rms (600/6000 A)
10 Hz to 50 kHz (-3 dB typical)
< ±1° (45 Hz to 65 Hz),
±10° (at 20 kHz)
±2 % of range