Advertisement
9. TEST RUNNING WITHOUT WATER
9.1. METHOD TO TEST RUNNING WITHOUT WATER
1. Set the power switch to "OFF".
2. Press and hold both the "Water level" and "Process" buttons with
one hand.
3. Set the power switch to "ON".
4. Release the your fingers from the buttons and power switch
which you pressed in steps (2) and (3) above.(Check A can be
carried out in this state with your fingers released.)
5. Within three seconds, press the "Water level" button to set to the
desired check procedure.(Carry out check B,C,D,E,M,G and H.)
6 Remove the spinner
shaft flange nut and
the spinner shaft
washer B.
7 Pull upward the tub
to remove.
8 Lay down the machine on it nothing drain hose side.
[NOTE]
Please spread cloth to prevent scratch on the body.
9 Remove 2 screws mounting the mounting plate B.
10 Remove 4 screws mounting the mechanism case.
13
Advertisement
