Listening To Music Of A Device Via Bluetooth Connection; A2Dp (Advanced Audio Distribution Profile) - Sony SRS-NS7 Help Manual

Help Guide
Wireless Neckband Speaker
SRS-NS7

Listening to music of a device via BLUETOOTH connection

You can enjoy listening to music of a BLUETOOTH device and operate it by the neckband speaker via BLUETOOTH
connection if it supports the following BLUETOOTH profiles.

A2DP (Advanced Audio Distribution Profile)

Enables you to enjoy high-quality audio contents wirelessly.
AVRCP (Audio Video Remote Control Profile)
Enables you to adjust the volume and operate to play, pause or skip to the beginning of the next/current track.
Operations may vary depending on your BLUETOOTH device and music playback app. Refer also to the operating
instructions supplied with the BLUETOOTH device.
Note
Make sure beforehand that the volume on the BLUETOOTH device and neckband speaker are set to a moderate level to avoid
sudden loud sound output from the neckband speaker.
Depending on the BLUETOOTH device, adjusting the volume of the neckband speaker may not be possible on the BLUETOOTH
device while playback on the device is stopped/paused.
Connect the neckband speaker with the BLUETOOTH device.
1
When a BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the
neckband speaker and the indicator on the neckband speaker starts flashing in blue.
Start playback on the BLUETOOTH device.
2
Wear the neckband speaker around the base of your neck with the (fabric-covered) speaker components
3
facing upward and adjust the volume with the -/+ (volume) buttons on the neckband speaker.
Be sure to wear the neckband speaker in a proper manner where you do not feel the vibrations of the neckband
speaker on the sides of your neck.
62