Sony SRS-NS7 Help Manual page 15

Help Guide
Wireless Neckband Speaker
SRS-NS7
Connecting the neckband speaker with the transmitter via a BLUETOOTH
connection
At the time of purchase, the neckband speaker is paired with the supplied transmitter.
Connect the transmitter and a TV, and then turn on the TV. When the neckband speaker is turned on afterward, it
automatically establishes a BLUETOOTH connection with the transmitter and you hear voice guidance (BLUETOOTH
connected) from the neckband speaker.
This section describes how to re-pair the transmitter with the neckband speaker.
Press and hold the
1
The indicator on the transmitter starts double flashing in blue to indicate that the transmitter is in pairing mode.
Put the neckband speaker into pairing mode.
2
Make sure that the neckband speaker is turned off, and then press and hold the
button on the neckband speaker for about 5 seconds until you hear voice guidance (BLUETOOTH pairing). When
the neckband speaker is in pairing mode, the indicator starts double flashing in blue.
When a BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the
neckband speaker and the indicator on the neckband speaker starts flashing in blue.
Note
Be sure to keep holding the button even in the event that you hear voice guidance (Power ON) in about 2 seconds after you
press and hold (power)/ (BLUETOOTH) button.
Related Topic
Turning the power on
Connecting the transmitter and a TV
(BLUETOOTH) button on the transmitter for about 5 seconds.
15
®
(power)/ (BLUETOOTH)