Sony SRS-NS7 Help Manual page 53

Help Guide
Wireless Neckband Speaker
SRS-NS7
Enjoying TV audio in spatial sound through the neckband speaker
™
By using a BRAVIA XR
as Dolby Atmos contents.
For the compatible TV models, access the following URL.
https://www.sony.net/bravia-xr-series?sqr
Connect the supplied transmitter and a TV, and then make settings for the 3D surround functions on the TV.
1
Establish a BLUETOOTH connection between the neckband speaker and the transmitter.
2
When a BLUETOOTH connection is established, audio output is switched from the TV to the neckband speaker.
Wear the neckband speaker around the base of your neck with the (fabric-covered) speaker components
3
facing upward and adjust the volume with the -/+ (volume) buttons on the neckband speaker.
Be sure to wear the neckband speaker in a proper manner where you do not feel the vibrations of the neckband
speaker on the sides of your neck.
Hint
Control over the volume of the neckband speaker is not available on the TV.
When the volume of the neckband speaker is maximized or minimized, you hear a notification sound.
As long as the 3D surround functions remain active on the BRAVIA XR TV, you can enjoy TV audio in spatial sound just by
connecting the transmitter with the neckband speaker from the next time on.
Note
While TV audio is playing in spatial sound, no audio comes out from the TV. The volume control feature of the TV remote control
is disabled as well.
The (play/call) button on the neckband speaker does not work.
TV in combination with the neckband speaker, you can enjoy TV audio in spatial sound as well
53