Preparing For The "Bravia" Sync - Sony STR-DH800 Operating Instructions Manual

Preparing for the
"BRAVIA" Sync
To use the "BRAVIA" Sync, turn the Control
for HDMI function on for both the receiver
and the connected component. The receiver is
compatible with the "Control for HDMI-Easy
Setting" function.
When your TV is compatible
with the "Control for HDMI-Easy
Setting" function
When you connect a Sony TV with the
"Control for HDMI-Easy Setting" function,
the Control for HDMI function of the receiver
can be turned on simultaneously by turning the
Control for HDMI function of the TV on.
1
Make sure that the receiver, TV, and
playback components are connected
using an HDMI cable (not supplied).
(The respective components must be
compatible with the Control for HDMI
function.)
2
Turn on the receiver, TV and playback
components.
3
Turn the Control for HDMI function of
the TV on.
The Control for HDMI function of the
receiver and all the connected components
are simultaneously turned on. During
setup, "SCANNING" flashes in the display
and once setting is completed,
"COMPLETE" will appear. Wait until the
setup is complete.
For details on setting the TV, refer to the
operating instructions supplied with the TV.
82 US
When your TV is not compatible
with the "Control for HDMI-Easy
Setting" function
Turn the Control for HDMI function of the
receiver and the connected component on
individually.
2CH/
A.DIRECT A.F.D.
AUTO CAL
DISPLAY
,
V/v/B/b
O
RETURN/
EXIT
1
Perform the steps given in "When your
TV is compatible with the "Control for
HDMI-Easy Setting" function"
(page 82).
2
Press AMP MENU.
3
Press V/v repeatedly to select "HDMI".
4
Press or b to enter the menu.
5
Press V/v repeatedly to select
"CTRL:HDMI".
6
Press or b to enter the parameter.
7
Press V/v repeatedly to select "CTRL
ON".
Control for HDMI function is activated.
8
Select the HDMI input of the receiver
and TV to match the HDMI input of the
connected component, so that the
image from the connected component
is displayed.
9
Set the Control for HDMI function for
the connected component to on.
If the Control for HDMI function for the
connected component is already set to on,
you do not need to change the setting.
MOVIE MUSIC
NIGHT
INPUT
SLEEP MODE
MODE
AMP
MENU AMP
MENU
HOME
TOOLS/
OPTIONS
MENU