Sony STR-DH800 Operating Instructions Manual page 75

2
Press CATEGORY MODE
repeatedly to select the "ONE
CAT".
• ALL CAT: You can select a channel
from all the categories. The initial
setting is "ALL CAT".
• ONE CAT: You can select a channel
from one category. "CAT" is displayed
on the display when you set to "ONE
CAT" mode.
3
Press CATEGORY + or
CATEGORY – to select the
category you want.
The category is selected and the channel
with the lowest number in the specified
category is selected.
4
Press TUNING + or TUNING – to
select the channel.
You can also press TUNING MODE on
the receiver to select "AUTO", and then
press TUNING + or TUNING – to select
a channel.
Notes
• When you select a channel in the "ONE CAT"
mode, the channel you selected may not be the one
in the category you want. This is because one
channel may belong to more than one category.
• If you press CATEGORY + or CATEGORY – in
the "ALL CAT" mode, the first channel of the next
or previous category is selected (CATEGORY
SKIP).
Selecting channels by inputting
the channel number directly
(DIRECT TUNING)
1
Press TUNER repeatedly to
select "SIRIUS".
You can also use INPUT SELECTOR on
the receiver.
2
Press D.TUNING.
3
Press SHIFT.
4
Press the numeric buttons to
enter the channel number.
5
Press ENT/MEM.
You can also use MEMORY/ENTER on
the receiver.
The selected channel is tune in.
Displaying the SIRIUS Satellite
Radio information on the front
panel display
?/1
TONE INPUT SELECTOR
SPEAKERS
MEMORY/
TONE MODE INPUT MODE TUNING MODE TUNING ENTER
PHONES
Press DISPLAY on the receiver
repeatedly.
Each time you press DISPLAY while tuning in
the channel, the display changes cyclically as
follows:
Channel name t Channel number t
Category name t Artist name/Feature t
Song/Program title t Composer name t
Signal strength t Sound field type
MASTER VOLUME
2CH/
A.DIRECT A.F.D. MOVIE MUSIC DISPLAY DIMMER MUTING
VIDEO 2 IN
AUTO CAL MIC VIDEO L AUDIO R
DISPLAY
75 US