Hardware Setup
Connecting the Speakers
W hen you have set the Multi-Channel Audio Function mode properly in the software
utility, connect your speakers to the correct phone jacks in accordance with the
setting in software utility.
n 2-Channel M ode for Stereo-Speaker Output
Refer to the following diagram and caption for the function of each phone jack on the
back panel when 2-Channel Mode is selected.
1
Line Out (Side surround channels) Right.
2
Line Out (Side surround channels) Left.
3
Line Out (Front channels) Right.
4
Line Out (Front channels) Left.
5
Line Out (Rear surround channels) Right.
6
Line Out (Rear surround channels) Left.
7
Line Out (Center channel)
8
Line Out (Subwoofer channel)
3
1
2
4
Realtek ALC883 Audio
5
7
8
6
A-19