Next steps
1. Reconnect the
battery
2. Replace the
base cover
3. Replace the
SD memory card
4. Follow the procedure in
Coin-cell battery
Removing the coin cell battery
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory
3. Remove the
base
cover.
4. Disconnect the
battery
5. Remove the
hard drive
NOTE:
Required for systems with 42 Whr battery
6. Remove the
IO
board.
Steps
1. Flip the I/O board.
2. Using a plastic scribe, gently pry the coin cell battery out of the slot on the I/O board [1].
3. Remove the coin cell battery away from the computer [2].
30
Removing and installing components
cable.
after working inside your computer
before working inside your
card.
cable.
assembly.
computer.