Post Behaviour; Manageability - Dell Precision 5820 Tower Owner's Manual

Post behaviour

Table 12. POST Behavior
Option
Numlock LED
Keyboard Errors
Extend BIOS POST Time Allows you to create additional pre-boot delay and see POST status messages.
Security Audit Display
Disable
Full Screen Logo
Warnings and Errors

Manageability

Table 13. Manageability
Option
USB Provision
MEBx Hotkey
102 System Setup
Description
Specifies if the NumLock function can be enabled when the system boots. This option is set by
default.
Specifies whether keyboard related errors are reported when it boots. This option is set by
default.
Click one of the following options:
● 0 seconds(Default)
● 5 seconds
● 10 seconds
Allows you to disable the display of the Security Audit results during POST.
● Disable Display Of Security Audit Display
This option is not set by default.
Allows you to display full screen logo, if your image matches screen resolution.
● Enable Full Screen Logo
This option is not set by default.
Allows you to select different options to either stop, prompt and wait for user input, continue
when warnings are detected but pause on errors, or continue when either warnings or errors are
detected during the POST process.
Click one of the following options:
● Prompt on Warnings and Errors—Default
● Continue on Warnings
● Continue on Warnings and Errors
Description
Allows you to provision Intel AMT using the local provisioning
file via a USB storage device.
● Enable USB Provision
NOTE: When disabled, provisioning Intel AMT from a USB
storage device is blocked.
This option is not set by default.
Allows you to specify if the MEBx Hotkey function should be
enabled when the system boots
This option is set by default.