Buick 2011 Lucerne Owner's Manual page 224

3. Press the softkey under the ON tab on the radio
display.
If is pressed and the song title or artist information is
longer than what can be displayed, the extra information
will page every three seconds when Auto Text is
activated.
Press to choose between FM, AM, or XM
(if equipped).
Turn to select radio stations.
Press to seek or scan stations with a strong
signal in the selected band.
To seek stations, press and release the
button to go to the previous station and stay there.
To scan stations, press and hold the
button for a few seconds until the radio beeps
once. The radio goes to a station, plays for a few
seconds, then goes to the next station. Press the
SEEK button again to stop scanning.
4-68
To scan preset stations in the selected band, press
and hold the
a double beep sounds. The radio goes to a stored
preset, plays for a few seconds, then goes to the
next stored preset. Press the
to stop scanning preset stations.
signal in the selected band.
To seek stations, press and release the
button to go to the next station and stay there.
To scan stations, press and hold the
button for a few seconds until the radio beeps
once. The radio goes to a station, plays for a few
seconds, then goes to the next station. Press the
SEEK
To scan preset stations in the selected band, press
SEEK
and hold the
a double beep sounds. The radio goes to a stored
preset, plays for a few seconds, then goes to the
next stored preset. Press the
to stop scanning preset stations.
SEEK button for four seconds until
Press to seek or scan stations with a strong
SEEK button again to stop scanning.
SEEK button for four seconds until
SEEK button again
SEEK
SEEK
SEEK button again