Ec Declaration Of Conformity - Siemens FLENDER K SH Series Assembly And Operating Instructions Manual

12.2

EC declaration of conformity

within the meaning of EC Directive 94/9/EC of 23.03.1994 and the legal requirements laid down for its
implementation
The manufacturer, Siemens AG, 46395 Bocholt, Germany, declares that the equipment described in these
assembly and operating instructions:
is in conformity with Article 1 and Article 8, Paragraph 1 b) ii) or 1 c) of Directive 94/9/EC and complies
with the requirements of Directive 94/9/EC and the following standards:
DIN EN 1127‐1 : 10‐2011
DIN EN 13463‐1 : 07‐2009
DIN EN 13463‐5 : 10‐2011
DIN EN 13463‐6 : 07‐2005
DIN EN 13463‐8 : 01‐2004
DIN EN 60079-0 : 06‐2014
The technical documentation has been delivered to the body named below:
DEKRA EXAM GmbH, 44727 Bochum, Germany, code number: 0158.
Voerde, 2015‐05‐18
Voerde, 2015‐05‐18
EC declaration of conformity
Crane gear unit
K.SH, K.SM, K.VH, K.HH, K.KH,
K.DH, K.HM, K.KM, K.DM
Sizes 15 to 24
and sizes 115 to 124
Mark Zundel
(PD MD AP EMEA VOE OE)
Dr. Bernhard Hoffmann
(PD MD AP)
BA 5846 en 05/2015
108 / 109