Panasonic KX-TGB810 Operating Instructions Manual page 33

Note:
If registration is not successful the
¿UVW WLPH SOHDVH UHSHDW WKH SURFHVV
again in case the base registration
period ran out of time. If the base unit
is not found after about 120 seconds,
the handset returns to standby. Try
registering again.
De-register a handset (Available
for: KX-TGB812)
Use one handset to de-register
another. The handset being used
cannot de-register itself.
1
MENU/OK ,
 
setting", press
2 d
"Deregister", press
 
MENU/OK .
 
3
Enter the 4 digit PIN code (0000),
press MENU/OK

4 u d
or to select the handset
   
that needs to be de-registered,
press MENU/OK

beep will be heard and the
display will return to standby.
For assistance, please visit http://shop.panasonic.com/support
d
"Advanced
 
MENU/OK .
 
.

 $ FRQ¿UPDWLRQ

Useful information
Liquid damage
Liquid or other form of
moisture has entered the
handset/base unit
Disconnect the AC adaptor
and telephone line cord from
the base unit. Remove the
batteries from the handset and
leave to dry for at least 3 days.
After the handset/ base unit
are completely dry, reconnect
the AC adaptor and telephone
line cord. Insert the batteries
and charge fully before use. If
the unit does not work properly,
contact an authorized service
center.
Caution:
To avoid permanent damage,
do not use a microwave oven to
speed up the drying process.
33