Panasonic KX-TGB810 Operating Instructions Manual page 32

Useful information
Clean the charge contacts with a
dry cloth.
Check that the mains power is
connected properly.
The battery is full. When the
handset is fully charged,
appear steadily on the display.
I cannot enter the time when
setting the date and time
You need to use 12-hour clock
format, but invalid time may be
displayed. Enter the time between
01:00 and 12:59.
No Caller Display
You must subscribe to Caller
ID service. Contact your phone
service provider for details.
The caller may have withheld their
number.
The record cannot be found in the
phonebook. Check that the correct
name/number is stored in the
phonebook, with the full area code.
Cannot register a handset to the
base unit
Check that correct PIN code
(0000) has been entered.
Check that the handset and base
unit are at least one metre away
from other electrical equipment
to avoid interference when
registering.
32 For assistance, please visit http://shop.panasonic.com/support
Handset does not ring
The handset ringer volume may
be set to Off, see page 28.
Noise interference on my
phone or on other electrical
will
equipment nearby
Place the phone at least one
metre away from electrical
appliances or any metal
obstructions to avoid any risk of
interference.
Registering a handset
On the base unit:
1
Press and hold
seconds. The base unit will
remain in registration mode for
120 seconds.
On the handset:
2
If "Unregistered" is displayed,
press

the 4 digit PIN code (0000) and
press

3
If "Searching" or "Unavailable"
is displayed, press
d

press

4 d
"Register", press
 
MENU/OK

5
Enter the 4 digit PIN code (0000)
and press
A beep will be heard if the registration
is successful. The handset is
automatically assigned an available
handset number.

for 5
 
MENU/OK and then enter

MENU/OK .

MENU/OK

"Advanced setting",

MENU/OK .

.

MENU/OK .
 
,