EXAMPLE 2 (Cooking program with steam cycle)
-For menu #2, we will program it so that we have a steam injection of 20 seconds, a cooking time of
20 minutes at 375°F followed by a 15 seconds buzzer.
To access the programming mode:
• Press both arrows simultaneously for 5 seconds. Both lights light up to show that the
programming mode is working.
• Select the menu number (Ex. #2)
Step #1
SP1 appears.
Use the arrows to adjust to the desired temperature
Press on the number of the menu to confirm
t1 appears
Use the arrows to select the desired timing
Press on the number of the menu to confirm
E1 appears
Use the arrows to select the appropriate code
Press on the number of the menu to confirm
Step #2
SP2 appears.
Use the arrows to adjust to the desired temperature
Press on the number of the menu to confirm
t2 appears
Use the arrows to select the desired timing
Press on the number of the menu to confirm
E2 appears
Use the arrows to select the appropriate code
Press on the number of the menu to confirm
A20
Suggested values
(375°F)
(ex. # 2)
(00:20)
(ex. # 2)
(0001 for the steam)
(ex. # 2)
Suggested values
(375°F)
(ex. # 2)
(20:00)
(ex. # 2)
(0000 for no event)
(ex. # 2)