Doyon JA6SLG User Manual page 21

Step #2
SP2 appears.
Use the arrows to adjust to the desired temperature
Press on the number of the menu to confirm
t2 appears
Use the arrows to select the desired timing
Press on the number of the menu to confirm
E2 appears
Use the arrows to select the appropriate code
Press on the number of the menu to confirm
Step #3
SP3 appears.
Use the arrows to adjust to the desired temperature
Press on the number of the menu to confirm
t3 appears
Use the arrows to select the desired timing
Press on the number of the menu to confirm
E3 appears
Use the arrows to select the desired code
Press on the number of the menu to confirm
To get out of the programming mode, press #12 and then press "CLOCK" twice (#12, CLOCK,
CLOCK). The screen will show 00:00.
Note: You should always use menu #1 for preheating because the controls starts automatically with
this menu.
Never use program #1 for a steam cycle because it will start automatically when the oven is
A19
WARNING
turned on.
Suggested values
(400°F)
(ex. # 1)
(00:15)
(ex. # 1)
(0010 for buzzer)
(ex. # 1)
Suggested values
(400°F)
(ex. # 1)
(00:01)
(ex. # 1)
(0000 for no event)
(ex. # 1)