Table of Contents
Advertisement
Sound system selection
Preparation:
Set the Sound System according to
your TV set or residential area.
• Turn ON the TV and set to the video input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)
1
2
3
4
16
Automatic TV station presetting
Your DVD/VCR has one built-in tuner
Automatic station presetting
to receive the broadcast. Before you
All stations will preset in sequence available in your area.
record one TV-Broadcast, you must
set and preset the whole of the broad-
Preparation:
casts. This DVD/VCR can preset up
• Turn ON the TV and set to the video input mode.
to 80 broadcast.
• Press VCR to select the VCR mode. (The VCR indicator will light.)
1
Press VCR MENU.
Press
CHANNEL SETUP. Then
press ENTER.
2
Press
TUNING.
3
Press ENTER.
The DVD/VCR will begin searching and setting with early stored
channel, the number is increased by one into memory all the broad-
casting channels available in you area (VHF-L, VHF-H, UHF). While
setting channels, AUTO TUNING appears. When the setting fin-
ished, the CHANNEL MAPPING menu will appear.
4
Press VCR MENU repeatedly until the TV picture appears on
the screen.
Notes:
• TV reception interference or power fail-
To skip a channel position
ure may result in Automatic station pre-
Unwanted channels can be skipped so that they cannot be called up
setting malfunctions. In such a case
by pressing CH +/–. Select the 29, then press CANCEL. This chan-
repeat the setting procedure from the
nel's number will be flashing. That way you can cancel further chan-
beginning.
nel one after the other.
However, you cannot receive the nec-
essary broadcast yet, try to preset the
Note: To cancel skipping select the skipped channel using 10
broadcast manually. (See page 22.)
number buttons, then press CANCEL. The channel No. dose not
• When the unit is in the auxiliary input
blink any longer, and the channel No. now may be selected again
mode, you cannot preset channels.
using CH +/–.
18
Press VCR MENU.
TIMER REC SET
AUTO REPEAT
Press
or
to select
VCR SETUP
SYSTEM SETUP, then press
CHANNEL SETUP
ENTER.
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT
:
MENU
Press
or
to select RF
OUT.
LANGUAGE/üáúIK
AV2
Press
/
or ENTER to se-
lect the Sound System [G], [K]
or [I] according to your TV set.
LANGUAGE/üáúIK
AV2
Press VCR MENU to return to the normal screen.
TIMER REC SET
or
to select
AUTO REPEAT
VCR SETUP
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT
:
MENU
or
to select AUTO
CHANNEL SETUP
CH TUNING
AUTO TUNING
CHANNEL MAPPING
SELECT :
ENTER : ENTER
EXIT
:
MENU
CHANNEL MAPPING
1
5
2
6
3
7
4
8
AUTO TUNING
SELECT
:
SKIP
:
CANCEL
CHANGE NAME
:
1
MOVE
:
2
EXIT
:
MENU
Your DVD/VCR is fitted with a 24 hour
clock.
You must set the date and time for
timer recordings.
[OFF]
[AV]
[K]
[AV]
[G]
Note:
In case of a power failure, the clock will
continue to operate for another 30 min-
utes with quartz-controlled precision. To
indicate that the power failure has lasted
for an excessive period of time "--:--" will
appear on the display. In this case read-
just time and date.
Changing TV station names
For a number of TV stations (such as
MTV) no name code will be displayed
because these TV stations do not
provide the necessary information.
You can enter the respective names
yourself. Moreover, unwanted station
codes can be changed by the user.
[OFF]
9
10
11
12
Note:
When a wrong character is entered,
press CANCEL and enter the correct
character.
Clock setting
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)
Example: Setting the clock to "11:30" October, 30 (SAT), 2004.
1
Press VCR MENU. The VCR menu screen will appear.
If the clock is not set, SYSTEM SETUP menu of step 3 will appear
automatically.
2
Press
or
to select SYS-
TIMER REC SET
TEM SETUP, then press EN-
AUTO REPEAT
VCR SETUP
TER.
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT
:
MENU
3
Press
or
to select CLOCK
SET, then press ENTER.
LANGUAGE/üáúIK
AV2
4
Press
or
repeatedly or 10
CLOCK SET
number buttons until "30" ap-
DAY
pears. Then press
.
MONTH
YEAR
TIME
SELECT :
SET
:
OK
: ENTER
5
Set the month, year, hour and
CLOCK SET
minute as in step 4.
DAY
Then press ENTER.
MONTH
YEAR
• In case of an erroneous input
TIME
press
to go back to before
step and enter again.
SELECT :
SET
:
OK
: ENTER
6
Press VCR MENU repeatedly until the TV picture appears on
the screen.
7
The clock will begin operation.
VCR
Mapping TV stations
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR to select the VCR mode. (The VCR indicator will
light.)
Example: MTV is assigned to station No. 10, but the code "MTV" will
not be displayed and will also not appear in the table.
1
Select the "CHANNEL MAPPING" in Menu-screen in the same
way as the step 1 ~ 2 on page 18. Then press ENTER.
2
Press
/
or
/
repeat-
CHANNEL MAPPING
edly until the station number
1
5
position now to be named will
2
6
blink.
3
7
8
4
• If you want to turn over the
SELECT
SKIP
page when the blinking spot is
CHANGE NAME
in the left or right edge of on-
MOVE
screen, press
or
repeat-
EXIT
edly until the next page's 12
stations appears.
3
Press "1" of 10 number but-
CHANGE BROADCAST NAME
tons. The first display line will
1
5
2
6
change to "CHANGE BROAD-
3
7
CAST NAME".
8
4
SELECT
NAME
OK
CLEAR
EXIT
4
Press
or
repeatedly until
CHANGE BROADCAST NAME
the desired character appears.
1
5
2
6
Then press
. Use
or
3
7
to select the next character.
8
4
Then press
. Up to four char-
SELECT
NAME
acters can be used to create a
OK
station name. The character
CLEAR
EXIT
"
" stands for a space.Then
press ENTER.
Each press of
will change the screen display as follows.
A, B, C, ... X, Y, Z
0, 1, 2, ... 7, 8, 9
–
+
/
•
5
Press VCR MENU repeatedly until the TV picture appears on
the screen.
[OFF]
[AV]
[K]
30
FRI
1
2004
0:00
/ 0—9
EXIT : MENU
30
SAT
10
2004
11:30
/ 0—9
EXIT : MENU
17
9
10
11
12
:
:
CANCEL
:
1
:
2
:
MENU
9
10
11
12
:
:
: ENTER
:
CANCEL
: MENU
9
10 M
11
12
:
:
: ENTER
:
CANCEL
: MENU
19
Advertisement
Chapters
Table of Contents
Troubleshooting
