Bematech DC-3500 User Manual page 57

Arrow Arrow keys
ENT Enter key
0-9 Alphanumeric keypad
F1-F4 Function keys
BS Backspace key
Power/Backlight on key
ESC Escape key
SCAN Scan key
SF/Fn Shift key
TAB Tab key
SP Space key
Press these to move around the screen.
Press to confirm entries or commands.
Press to enter numerical or alphabetical data.
Press to access function keys 1-4.
Press to move cursor and deletes the previous character
each time.
4. Press to turn the power on.
5. Press more then 3 seconds for turn the terminal power
off and go into the suspend mode.
6. Press to turn the LCD backlight on when it is off.
Press to perform a cancel action.
Press and hold to scan a barcode.
The key is used in combination with other keys to type
special characters or perform other function keys.
5. Press after SF/Fn key and press Up key to turn
input method into upper alphabetical.
6. Press after SF/Fn key and press Down key to turn
input method into lower alphabetical.
7. Press after SF/Fn key and press Left or Right key to
the input method into numerical.
turn
8. Press after SF/Fn key and press F1-F4 key to perform
F5 - F8 key.
Press to add a tab indention.
Press to add a space character.
the
the