Battery Installation - Steren COM-230 User Manual

2
4
1
2
2
3
INSTALLATION
1.- Locates an available USB port in the computer,, then connect
one end of a USB male cable (type A).
2.- Plug the other end into the base. The indicator LED will light
on.
3.- The computer will detect the new device and will update the
system automatically.
4.- After this process, you will be ready to use the device.

BATTERY INSTALLATION

Before to begin the use of the device, it is necessary that you
place a CR2032 battery into the battery compartment. Make sure
to place it right, paying attention to polarity.
USING THE REMOTE CONTROL WITH
PREDETERMINED APPLICATIONS
If you want to use the remote control with one of the
predetermined applications, follow these instructions:
1.- Press C button, once.
2.- Press the button of the application to be used (Real Player,
ENGLISH-5