MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927
OPERATING CHASSIS OUTSIDE OF CABINET
1) Remove screws from back terminal board.
Screws A = (7), B = (2), C = (2)
B
C
3) Support bracket has latch that must be opened
before removing from unit
latch
5) Disconnect AC cord from connector PS and
disconnect connector CE1
All manuals and user guides at all-guides.com
A
support bracket
CE1
PS
Page 26
2) Remove support bracket screws D = (4), and
mounting screw E = (1)
E
4) Remove mounting screw F = (1) on right side
of chassis behind bracket
F
6) Pull chassis from cabinet. Rotate to side as
pictured below and remove screws G = (2)
G
D