Setup Procedures; Quick Setup List - Simplicity Prestige 1800GT Dealer Setup & Adjustment Instructions Manual

Quick Setup List -

Page Setup Procedure
4 Uncrating
4 Battery Activation &
Installation
5 Tractor Assembly
5 Check Fluid Levels
7 Mower Assembly
11 Lubrication
12 SAFETY CHECKS
13 Burnish Electric Clutch
1/2003
Prestige, Conquest, & Broadmoor Series
Steps to Perform
❏ Remove Crate & Banding.
❏ Place Transmission Release Lever in PUSH position & Roll
Tractor forward off skid. (Note: You may want to assemble
the steering wheel at this time.)
❏ Charge the Battery (Note: proceed with other setup steps
while battery is charging).
❏ Test Battery with hydrometer or load-tester.
❏ Install & secure Battery.
❏ Assemble the Steering Wheel (Note that the thick spoke
faces the seat.)
❏ Assemble the Seat.
❏ Check the Seat Switch connection.
❏ Fill & check Engine oil level.
❏ Check Transmission fluid level.
❏ Reduce & check Tire Pressures
(Front tires 15 psi, Rear tires 6-8 psi).
❏ Install deflector.
❏ Torque mower blades.
❏ Attach mower Hitch & Leveling Rod.
❏ Set Gauge Wheels.
❏ Install Mower Deck onto Tractor and Attach Belt.
❏ Level Mower Deck (Side-to-side & Front-to-back).
❏ Lubricate all grease & oil points.
❏ Check for LOOSE HARDWARE.
❏ Check all OPERATOR CONTROLS.
❏ Check DASH SAFETY LIGHTS.
❏ Test PARKING BRAKE.
❏ Perform MOWER BLADE STOPPING CHECK.
(Blade must stop within 5 seconds!)
❏ Perform SAFETY INTERLOCK SYSTEM CHECK.
❏ Burnish Electric Clutch (run for 15 seconds, repeat 10
times) .
❏ Repeat MOWER BLADE STOPPING CHECK.
(Blade must stop within 5 seconds!)
3
TP 300-2534-02-PR-SMA